Availability
Overview of available formats
| Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|
| 2,800 | 2,100 | 10 | 12 | 13 | 16 | 18 | 19 | 22 | 25 | 28 |
Certificates & labels
Product features
Areas of application
- Exclusive interior and project fixtures and fittings, living room and bedroom furniture / sliding doors furniture and kitchen fronts.
Product standard
- In accordance with EN 14322
Core material
- ClassicBoard P2: Urea resin-bonded particleboard, type P2 conforming to EN 312, suitable for non load-bearing purposes in dry areas.
Reaction to fire
- Normally flammable
- D-s2,d0 (EN 13986 (CWFT) dependent on end use)
EC scope
- EN 13986:2004 +A1:2015
- Boards for interior fitments (including furniture) for use in dry conditions
Formaldehyde emission class
- E1 E05
Product safety
- This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
- We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
Special
- The lacquering can be applied on one or both sides.
- Surface defects must not have a detrimental effect. Defects not larger than 1.0 mm² and detected from an observation distance of 0.7 m and a viewing angle of about 30° during the evaluation of the surface are permissible.
Max. 1 fault per m² is permissible.
The total number of defects allowed per board may be concentrated in one area or split across several defects. - PrimeBoard XTreme SuperMatt is supplied chamfered on all sides. Before further processing a trimming cut is necessary.
- We recommend use in indoor areas with normal climatic conditions, i.e. with a relative humidity of 40 – 60 % and natural daylight. In buildings with ventilation technology, the normal climate must be permanently maintained by means of appropriate ventilation.
- All stated technical values apply only in moderate climate zones with room temperatures of max. 35°C.
- Under unfavourable climatic conditions, such as temperatures above 35°C, complete darkness and very high humidity, coated products may develop a slight dark yellowing. This is reversible by UV irradiation, but a complete restoration of the original colour is not guaranteed. We accept no liability for this process and the resulting colour changes.
- FSC certification or PEFC certification available on request.
Colour and surface match
- Decor, structure and core board all influence the final appearance of the end product.
- Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
- The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
- To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
Product handling
Machines and tools
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage, handling and transport
- On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
- Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
- Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
- Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
- Sheets / boards must not be moved against each other, they should be moved individually by hand or with suction equipment.
- To protect the high quality surface Pfleiderer delivers these surface textures with a protective foil. The protective foil must be removed as soon as possible after processing – but at the latest within 6 months after delivery – to ensure residue-free removal of the foil. In addition, foiled boards must not be exposed to direct sunlight (UV radiation).
Health and safety
- Please wear the appropriate personal protective equipment (PPE) when processing and handling.
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents.
- The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided.
- For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.
Disposal
- PrimeBoard XTreme SuperMatt is classified in waste wood class A2. The known disposal regulations regarding material and energy recovery apply.
You like to learn more?
Please get in touch with us! We look forward to hearing from you.
Samples
Info material
Downloads
Related products
Melamine faced particleboard type P2 conforming to EN 312, with 100 % biogenic, formaldehyde-free glue (OrganicGlue), 100 % recycled wood as well as high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Melamine faced particleboard type P2 conforming to EN 312, with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Low emission melamine faced particleboard type P2 conforming to EN 312, with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Low emission melamine faced particleboard type P2 conforming to EN 312, with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Low emission melamine faced particleboard type P2 conforming to EN 312, with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Low emission melamine faced particleboard type P2 conforming to EN 312, with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Melamine faced particleboard type P3 for damp areas, with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Melamine faced particleboard type P3 for damp areas, with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications. Melamine faced particleboard type P3 for damp areas, with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Melamine faced medium-density fibreboard (MDF), with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Melamine faced medium-density fibreboard (MDF), with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Decorative black through-dyed melamine faced medium-density fibreboard (MDF), with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Decorative black through-dyed melamine faced medium-density fibreboard (MDF), with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications. Decorative black through-dyed melamine faced medium-density fibreboard (MDF), with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Natural, raw, decorative black through-dyed melamine faced medium-density fibreboard (MDF), with high quality and innovative high gloss multi-layer coating, made up of a permanently elastic functional layer, for vertical applications.
Natural, raw, decorative black through-dyed melamine faced medium-density fibreboard (MDF), with high quality and innovative supermatt coating and anti-fingerprint effect for vertical applications.
Compact high-pressure laminate for outdoor use in standard quality according to EN 438-6:EDS / intensive decors according to EN 438-6:EGS. With uniform black-coloured core, single-sided decorative acrylic lacquer and decorative melamine resin surface on the reverse.
Compact high-pressure laminate for outdoor use in standard quality according to EN 438-6:EDS / intensive decors according to EN 438-6:EGS. With uniform black-coloured core and decorative acrylic lacquer on both sides.
Compact high-pressure laminate for outdoor use in flame retardant quality according to EN 438-6:EDF / intensive decors according to EN 438-6:EGF. With uniform black-coloured core, single-sided decorative acrylic lacquer and decorative melamine resin surface on the reverse.