Additional description
OrganicBoard Pure P2 meets the growing demands for resource conservation, best healthy living and uncompromising quality. The particularly sustainable decorative particleboard with a unique, regenerative raw material concept of recycled wood and biogenic bonding OrganicGlue conserves natural as well as fossil resources and separates the production as far as possible from the supply situation for natural gas and urea.
- Core material made from 100 % recycled wood
- Core material with 100 % OrganicGlue
- Maximum conservation of fossil resources
- Formaldehyde-free bonding
Areas of application
Carcass and front quality for furniture making, shopfitting and interior fitting. For applications with the highest sustainability requirements and healthy living.
Certificates & labels
![](/file_pim/_processed_/2/3/csm_blue-angel-de-uz-76-im0027957_42b50e2d1d.jpg)
Blue Angel DE-UZ 76
The Blue Angel has been the federal government's eco-label for 40 years. Independent and credible, it sets demanding standards for environmentally friendly products and services. The Blue Angel is the orientation for sustainable purchasing.
![](/file_pim/_processed_/7/b/csm_fsc-certified-im0028043_61b8ac4ca1.jpg)
FSC-certified
The Forest Stewardship Council (FSC) is a global, not-for-profit organization dedicated to the promotion of responsible forest management worlwide. FSC defines standards based on agreed principles for responsible forest stewardship that are supported by environmental, social and economic stakeholders.
![](/file_pim/_processed_/c/c/csm_pefc-certified-im0028071_c9d6bcc285.jpg)
PEFC certified
PEFC is the largest institution for ensuring sustainable forest management through an independent certification system. Wood and wood products with the PEFC seal originate demonstrably from ecologically, economically and socially sustainable forestry.
![](/file_pim/_processed_/5/c/csm_qng-ready-label-im0033691_cc6d7bd3d4.jpg)
QNG Ready Label
The criteria of the Quality Seal for Sustainable Buildings (QNG) must be met in order to receive KfW funding for new buildings. Annex document 3.1.3 Avoidance of harmful substances in building materials is part of the mandatory conditions for the QNG. QNG-ready products are tested and approved in accordance with these requirements.
![](/file_pim/_processed_/e/4/csm_emissons-dans-l-air-interieur-im0030256_2c2678ab8e.jpg)
Émissons dans l'air intérieur
Emission-tested building materials and products can make an important contribution to good indoor air quality. The emission label A+ to C is used to identify the emissions of building products and materials for interior design and has its origins in France. Class A+ stands for particularly low-emission products, class C for the highest-emission products.
Awards
![](/file_pim/_processed_/0/2/csm_german-innovation-award-2023-special-im0030226_8a45fc9843.jpg)
The German Innovation Award honours products, technologies and services that break new, innovative ground and offer solutions that stand out for their added value for users and the environment. The title "Special Mention" is awarded to those innovations which are particularly impressive through well thought-out aspects, original approaches or ingenious detailed solutions.
![](/file_pim/_processed_/7/d/csm_german-design-award-2023-special-mention-im0030281_d37278493d.jpg)
Due to the high quality of the participating field, the Design Council also awards a Special Mention. This award acknowledges work whose design has particularly successful partial aspects or solutions – a title that honours the commitment of companies and designers.
Product section
![](/file_pim/_processed_/c/4/csm_IM0030075_65fb8800da.jpg)
Availability
Formats
Length (mm) | Width (mm) | Thickness (mm) |
---|---|---|
2,800 | 2,100 | 8 | 10 | 16 | 18 | 19 | 22 | 25 |
5,600 | 2,100 | 8 | 10 | 16 | 18 | 19 | 22 | 25 |
Product features
Product standard
- EN 14322
Reaction to fire
- D-s2,d0 according to EN 13986 dependent on end use (Thickness: ≥ 9 mm / Gross density: ≥ 600 kg/m³)
Formaldehyde emission class
- E1 E05
- F****
Antimicrobial effect
- Surface with antimicrobial effect in 24 h for interior fit-out and finishes – Test Methodology JIS Z 2801 / ISO 22196
Product safety
- This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
- The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.
- We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
Special
- FSC certification or PEFC certification available on request.
Colour and surface match
- Decor, structure and core board all influence the final appearance of the end product.
- Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
- The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
- To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
Product handling
Machines and tools
- Can be worked with carbide (HW) or diamond (DP) tipped tools on conventional woodworking machines.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage, handling and transport
- On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
- Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
- Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
- Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
- Sheets / boards must not be moved against each other, they should be moved individually by hand or with suction equipment.
- A protective foil must be removed as soon as possible after processing – but at the latest within 6 months after delivery – to ensure residue-free removal of the foil. In addition, foiled boards must not be exposed to direct sunlight (UV radiation).
Health and safety
- Please wear the appropriate personal protective equipment (PPE) when processing and handling.
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents.
- The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided.
- For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.
Disposal
- We recommend material or energy recovery in approved plants.
Technical downloads
You like to learn more?
Please get in touch with us! We look forward to hearing from you.