PrimeBoard XTreme MDF plus

Product standard

• In accordance with EN 14322

Core material

• StyleBoard MDF plus: Medium-density fibreboard (MDF), with a uniform structure.

Reaction to fire

• Normally flammable
• D-s2,d0 (EN 13986 (CWFT) dependent on end use)

Formaldehyde emission class

• E1 E05
• TSCA Title VI

Product safety

• This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
• We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.

Special

• The lacquering can be applied on one or both sides.
• XTreme Matt (XT) / XTreme High Gloss (XG)
• Please comply with information for PrimeBoard XTreme Collection
• Surface defects must not have a detrimental effect. Defects not larger than 1.0 mm² and detected from an observation distance of 0.7 m and a viewing angle of about 30° during the evaluation of the surface are permissible.
  Max. 1 fault per m² is permissible.
  The total number of defects allowed per board may be concentrated in one area or split across several defects.
• PrimeBoard XTreme is supplied chamfered on all sides. Before further processing a trimming cut is necessary.
• FSC certification or PEFC certification available on request.

Colour and surface match

• Decor, structure and core board all influence the final appearance of the end product.
• Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
• The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
• To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.

Machines and tools

• Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage, handling and transport

• On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
• Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
• Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
• Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
• Sheets / boards must not be moved against each other, they should be moved individually by hand or with suction equipment.
• To protect the high quality surface Pfleiderer delivers these surface textures with a protective foil. The protective foil must be removed as soon as possible after processing – but at the latest within 6 months after delivery – to ensure residue-free removal of the foil. In addition, foiled boards must not be exposed to direct sunlight (UV radiation).

Health and safety

• Please wear the appropriate personal protective equipment (PPE) when processing and handling.

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents.
• The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided.
• For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.

Disposal

• PrimeBoard XTreme is classified in waste wood class A2. The known disposal regulations regarding material and energy recovery apply.