Availability
Overview of available formats
| Length (mm) | Width (mm) | Thickness (mm) | Front edge | Rear edge |
|---|---|---|---|---|
| 4,100 | 600 | 28 | 38 | Quadra | Protective edge |
| 4,100 | 650 | 38 | Quadra | Protective edge |
| 4,100 | 900 | 28 | 38 | Quadra | Protective edge |
| 4,100 | 900 | 28 | 38 | Quadra | Quadra |
| 4,100 | 1,200 | 28 | 38 | Quadra | Protective edge |
| 5,300 | 600 | 28 | 38 | Quadra | Protective edge |
| 5,300 | 900 | 28 | 38 | Quadra | Protective edge |
| 5,300 | 900 | 28 | 38 | Quadra | Quadra |
| 5,300 | 1,200 | 28 | 38 | Quadra | Protective edge |
Certificates & labels
Product features
Areas of application
- Duropal Worktops can be used wherever very high demands are made on surface resistance and durability. Thanks to their hygienic advantages, the classic areas of application are in modern kitchens and bathrooms, canteens and restaurants as well as doctors’ surgeries, in laboratories and shop fitting, but also for industrial and commercial workplaces.
Product standard
- In accordance with EN 13894-1
Core material
- ClassicBoard Hydrofuge MR: EN 312 standard urea resin bonded furniture panel with reduced thickness swell, suitable for non-load bearing use in humid conditions.
Formaldehyde emission class
- E1 E05
- TSCA Title VI
Antimicrobial effect
- Surface with antimicrobial effect in 24 h for interior fit-out and finishes – Test Methodology JIS Z 2801 / ISO 22196
Product safety
- This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
- The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.
- We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
Special
- You can find comprehensive accessories for our worktop range at www.pfleiderer.com.
- FSC certification or PEFC certification available on request.
Colour and surface match
- Decor, structure and core board all influence the final appearance of the end product.
- Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
- The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
- To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
Product handling
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Please moisture-seal the edges.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage, handling and transport
- On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
- Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
- Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
- Sheets / boards must not be moved against each other, they should be moved individually by hand or with suction equipment.
Health and safety
- Please wear the appropriate personal protective equipment (PPE) when processing and handling.
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces" (www.icdli.com).
Disposal
- We recommend material recycling or energy recovery.
You like to learn more?
Please get in touch with us! We look forward to hearing from you.
Info material
Downloads
Related products
Worktop consisting of a particleboard with reduced thickness swelling conforming to EN 312, decor side surfaced with Duropal XTreme, underside with water-repellent backing. The postforming front edge of the Quadra worktop has a radius of 3 mm, the rear edge is sealed with a protective edge. It is also available as a variant with both sides profiled. Duropal XTreme is an attractive supermatt surface material with an anti-fingerprint effect.
Worktop consisting of a particleboard with reduced thickness swelling conforming to EN 312, decor side surfaced with Duropal XTreme Touch, underside with water-repellent backing. The postforming front edge of the Quadra worktop has a radius of 3 mm, the rear edge is sealed with a protective edge. It is also available as a variant with both sides profiled. Duropal XTreme Touch is an attractive supermatt surface material with an anti-fingerprint effect in combination with natural-looking stone or wood structure.
Worktop consisting of a particleboard type P3 for damp areas, decor side surfaced with Duropal XTreme, underside with water-repellent backing. Both longitudinal edges of the PerForm worktop have a laser edge. . It is also available as a variant with a sealed protective edging strip on the rear edge. Duropal XTreme is an attractive supermatt surface material with an anti-fingerprint effect.
Compact high-pressure laminate with single or double-sided machined longitudinal edge in standard quality conforming to EN 438-9:BCS for use as a worktop. With uniform white-coloured core, single-sided decorative melamine resin surface and backing.
Compact high-pressure laminate with single or double-sided machined longitudinal edge in standard quality conforming to EN 438-9:BCS for use as a worktop. With uniform grey-coloured core, single-sided decorative melamine resin surface and backing.
Compact high-pressure laminate with single or double-sided machined longitudinal edge in standard quality conforming to EN 438-4:CGS for use as a worktop. With uniform black-coloured core, single-sided decorative melamine resin surface and backing.
Worktop consisting of a particleboard with reduced thickness swelling conforming to EN 312, decor side surfaced with Duropal HPL microPLUS® – an antimicrobial and antiviral surface finish (Sanitized® Silver), underside with water-repellent backing. The postforming front edge of the Quadra worktop has a radius of 3 mm, the rear edge is sealed with a protective edge. It is also available as a variant with both sides profiled.
Worktop consisting of a particleboard type P3 for damp areas, decor side surfaced with Duropal HPL, underside with water-repellent backing. Both longitudinal edges of the PerForm worktop have a laser edge. It is also available as a variant with a sealed protective edging strip on the rear edge.